Call to chat to our team Find your
nearest location

Product available in: Sa

Apex manufacture a large range of kit type sheds, garages and carports. From your small garden shed, right up to large machinery sheds. Carports to fit your standard family car to one to fit the caravan or boat.

Just send us a drawing and one of our friendly staff will provide you with a quotation.

Council required Certificates of Compliance are supplied with every order.

A selection of our ridge, knee and other plates and connectors are shown below.

 

Shed Components
Apex manufactures an extensive range of standard components and brackets used extensively in construction of sheds, garages and patios. Our press shop can also manufacture components to suit your own designs if required.

A selection of our ridge, knee and other plates and connectors are shown below.

Steel Strapping & Bracing
Additionally we manufacture a range of galvanised and steel strapping in 1mm x 30mm and 1.2mm x 32mm sizes as well as strapping tensioner brackets.

Enquire about Product

ADVERSE CONDITIONS
If material is to be used within 1km of salt marine, industrial or corrosive environments please contact our Apex sales staff.

WARRANTIES
Our products are supported by Bluescope Steel Limited and a full warranty is available.

LENGTHS / TRANSPORT
Apex Building Products can custom cut lengths to your requirements. Due to transport restrictions it is advisable to check with our office the maximum length.

HANDLING
Care should be taken at all times when handling Corrugated. Packs must be kept dry and stored above ground level, should the sheets become wet separate immediately and individually wipe and place in an area to dry.

COMPATIBILITY
ZINCALUME® steel sheeting is compatible with most roofing products. It is NOT recommended to use lead flashing/nails, copper or copper alloy materials with or in run-off situations.

CUTTING
Apex Building Products provides this service, however sheets may be cut using a power saw with a metal cutting blade. COLORBOND® steel sheeting must be cut with the coloured surface facing the ground. Ensure that no hot particles or debris come into contact with the COLORBOND® .

CLEAN UP
To prevent premature corrosion at the completion of each day ensure the sheeting area is cleared of all debris, including nails, rivets, rags and all cutting or drilling filings.

DELIVERY
Apex Building Products delivers to site within 1 to 2 days. To prevent any damage we require suitable arrangements to be made for unloading. Unloading by crane, ensure the load is evenly spread, if crane unavailable adequate manpower is required.